2022-08-22
The working principle and characteristics of sewage submersible electric pump
Sewage sewage submersible pump and other pumps, the impeller, pressure chamber is the two core components of the sewage pump. The advantages and disadvantages of its performance means that the performance of the pump is superior. The anti-blocking performance, efficiency and cavitation performance of the sewage submersible pump are guaranteed by the vane pump and the water pressure chamber.
2022-08-10
Characteristics and application analysis of sewage submersible pump
Sewage submersible pump adopts unique impeller structure and new mechanical seal, which can effectively transport solids and long fibers. Compared with the traditional impeller, sewage sewage submersible electric pump impeller adopts single channel or double channel form. It is similar to an elbow with the same cross section and has very good flow characteristics. The volute has reasonable structure and high efficiency. The impeller has been tested for static balance and dynamic balance, so the pump will not vibrate during operation.
2022-08-02
Small submersible pump current excessive situation
The following explains the small submersible pump current is too large and the reasons for overheating The wear of the motor submersible pump bearing will cause the submersible pump to be in an abnormal working state mechanically, resulting in a large current phenomenon, which can be solved by repairing or replacing damaged bearings and bushings.
2022-07-21
Matters needing attention in the use of small submersible pump
The following simple talk about small submersible pump in the use of the process should pay attention to matters Do not frequently switch the small submersible pump, because the pump stops running there will be backflow, if the motor starts immediately, the motor load will start, resulting in excessive starting current, winding burned, due to the start of the current is large, frequent start will burn the motor winding of the submersible pump.
2022-07-11
Small submersible pump installation steps
Tell us about the installation steps of small submersible pump Before the installation of the equipment, check whether the diameter of the drilling hole meets the external size requirements of the underground part of the equipment. For newly drilled deep wells, air compressors or old deep well pumps should be used to flush the wells, pump well water, and after cleaning, small submersible pumps can be installed and used.
2022-07-01
Common sense of the use of electrical tools for high-lift submersible pumps
The following explains the high lift submersible pump electrical tools to use common sense Safety appliances include insulated safety appliances and general protective appliances. There are two types of insulated safety appliances: 3360 basic insulated safety appliances and auxiliary insulated safety appliances.
-- Professional water pump and motor manufacturer
Contact Us
Address: 558 Jingguang South Street, Luohe Economic Development Zone, Henan Province
Copyright©2023 Luohe Huali Pump Industry Co., Ltd
Powered by:300.cn · Supports IPV6 access
SAF Coolest v1.3.1.1 设置面板 HDNSX-ZPGX-IVSXE-ZZQ
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page