100QJ multistage deep well submersible pump

QJ type well submersible pump is an energy-saving product designed according to national standards. It is widely used in farmland irrigation, industrial and mining enterprises for water supply and drainage, and people and livestock in plateau and mountainous areas. This type of pump is composed of QJ submersible pump and YQS submersible motor. It has the characteristics of simple structure, small size, light weight, convenient installation and maintenance, safe and reliable operation, high efficiency and energy saving.

Classification:

Key words:

submersible

well

Message consultation

Product Introduction

Model parameters of 100QJ multistage deep well pump

Model	Outer diameter (mm)	流量 (m³/h)	Head (m)	Power (KW)	Current (A)	Caliber (mm)
100Q12-50/10	95	2	50	0.75	20	40
100QJ2-70/14	95	2	70	1.1	3.1	40
100QJ2-80/16	95	2	80	1.1	3.1	40
100QJ2-100/20	95	2	100	1.5	3.8	40
100QJ2-110/22	95	2	110	1.5	3.8	40
100QJ2-140/28	95	2	140	1.5	3.8	40
100QJ2-150/30	95	2	150	2.2	5.6	40
100QJ2-160/32	95	2	160	2.2	56	40
100QJ2-190/38	95	2	190	2.2	5.6	40
100QJ2-200/40	95	2	200	3	73	40
100QJ3.2-40/6	95	3.2	40	0.75	20	40
100QJ32-54/8	95	3.2	54	0.75	20	40
100QJ3.2-68/10	95	3.2	68	1.1	3.1	40
100QJ32-72/11	95	3.2	72	1.1	3.1	40
100QJ3.2-99/15	95	3.2	99	1.5	3.8	40
100QJ3.2-108/16	95	3.2	108	2.2	5.6	40
100QJ3.2-135/20	95	3.2	135	2.2	56	40
100QJ32-144/2	95	3.2	144	3	73	40
100QJ3.2-170/25	95	3.2	170	3	73	40
100QJ3.2-230/34	95	3.2	230	4	10.26	40
100QJ5-24/6	95	5	24	0.75	20	40
100QJ5-36/9	95	5	36	1.1	3.1	40
100QJ5-48/12	95	5	48	1.5	38	40
100QJ5-64/16	95	5	64	2.2	5.6	40
100QJ5-72/18	95	5	72	22	5.6	40
1000J5-88/22	95	5	88	3	73	40
100QJ5-96/24	95	5	96	3	73	40
100QJ5-108/27	95	5	108	3	7.3	40
100QJ5-128/32	95	5	128	4	10.26	40
100QJ5-164/41	95	5	164	5.5	13.74	40
100QJ5-220/55	95	5	220	7.5	18.5	40
100QJ8-15/3	95	8	15	0.75	2.0	50
100QJ8-20/4	95	8	20	1.1	3.1	50
100QJ8-30/6	95	8	30	1.5	3.8	50
100QJ8-40/8	95	8	40	2.2	5.6	50
100QJ8-50/10	95	8	50	3	7.3	50
100QJ8-60/12	95	8	60	3	7.3	50
100QJ8-70/14	95	8	70	3	7.3	50
100QJ8-85/17	95	8	85	4	10.26	50
100QJ8-95/19	95	8	95	5.5	13.74	50
100QJ8-100/20	95	8	100	5.5	13.74	50
100QJ8-110/22	95	8	110	5.5	13.74	50
100QJ8-135/27	95	8	135	7.5	18.5	50
100QJ8-150/30	95	8	150	7.5	18.5	50
100QJ10-48/10	95	10	48	2.2	5.6	50
100QJ10-60/13	95	10	60	3	7.3	50
100QJ10-80/17	95	10	80	4	10.26	50
100QJ10-108/22	95	10	108	5.5	13.74	50
100QJ10-130/27	95	10	130	7.5	18.5	50
100QJ15-34/10	95	15	34	3	7.3	50
100QJ15-52/14	95	15	52	4	10.26	50
100QJ15-58/18	95	15	58	5.5	13.74	50
100QJ15-82/24	95	15	82	7.5	18.5	50
Notice: 100QJ motor is oil-filled fully enclosed motor, no need to add water!!

Product Introduction

Conditions of use

1. Three-phase AC power supply with rated frequency of 50HZ and rated voltage of 380±5%V;

2. The water inlet of the pump must be below 1 meter of the dynamic water level, but the diving depth shall not exceed 70 meters below the static water level, and the water depth from the lower end of the motor to the bottom of the well shall be at least 1 meter or more;

The water temperature shall generally not be higher than 20 ℃;

4. Water quality requirements:

(1) The sand content in the water is not more than 0.01 (weight ratio);

(2)PH value in the range of 6.5~8.5;

(3) The chloride ion content is not more than 400 mg/L.

5. It is required that the well should be positive, the well wall should be smooth, and no well pipes should be staggered.

Performance range

1. Rated flow: 2-15m ³/h

2. Rated lift: 15-230m

3. Rated power: 0.75-7.5kw

4. Rated diameter: 40-50mm

Application areas