DC submersible pump

The brushless DC water pump uses electronic components for commutation, without the use of carbon brushes for commutation, and uses high-performance wear-resistant ceramic shafts and ceramic bushings. The bushings are integrated with the magnet through injection molding to avoid wear. Therefore, the brushless DC magnetic type The life of the water pump is greatly enhanced.

Classification:

Key words:

pump

brushless

commutation

Message consultation

Product Introduction

DC submersible pump model parameters

Model	流量m³/h	Head M	Power KW	Voltage V
ZQB-12	6	11	0.18	12
ZQB-24	8	15	0.22	24
ZQB-48	10	18	0.32	48
ZQB-60	10	28	0.40	60
ZQB-48-60	10	30	0.40	48/60
ZQB-72	12	40	0.65	72
ZQB-48-2 inch	15	18	0.75	48
ZQB-60-2 inch	18	28	0.75	60

Product Introduction

Brushless DC water pump: The brushless DC water pump uses electronic components for commutation, without the use of carbon brushes for commutation, and uses high-performance wear-resistant ceramic shafts and ceramic bushings. The bushings are integrated with the magnet through injection molding to avoid wear. Therefore, the life of the brushless DC magnetic water pump is greatly enhanced. The stator part and the rotor part of the magnetic isolation water pump are completely isolated. The stator and the circuit board part are potted with epoxy resin, which is 100% waterproof. The rotor part is made of permanent magnet. The water pump body is made of environmentally friendly materials, with low noise, small size and performance. stable. Various required parameters can be adjusted through the winding of the stator, and can operate at a wide voltage.

Conditions of use

1. The DC power supply must be used to supply power to the DC electric water pump, and the AC power supply cannot be used, otherwise the motor will burn out.

2. When using a DC water pump, it must be used within the rated voltage range. For example, a 24V power supply cannot be used to drive a pump with a rated voltage of only 12V below 60 degrees.

3. Attention should be paid to the ambient temperature and can only be used when it is lower than 60 degrees.

Performance range

1. Rated flow: 6-18m ³/h

2. Rated lift: 6-40m

3. Rated power: 0.15-0.75kw

4. Rated voltage: 220V

Application areas

1. Farmland irrigation

2. Garden sprinkler irrigation

3. Deep well pumping

4, home car wash

5. Drainage irrigation