2022-12-22
Application and maintenance of high lift deep well pump
The following describes the application and maintenance of high-lift deep well pumps High lift deep well pump in use to build a tripod. And use the hoist (chain hoist) and wooden card board to assemble the water supply pipe and rotating shaft section by section, and assemble the rotary table. When assembling, make the motor shaft, rotating shaft and water supply pipe in the same boat, and the three must be perpendicular to the plane.
2022-12-12
How to store, transport and anti-corrosion measures for high-lift deep well pumps
How to store, transport and anti-corrosion measures for high-lift deep well pumps For well pumps containing packed wooden boxes, they should be placed on a flat concrete floor. For deep well pumps without packed wooden boxes, they should be discharged flat on the pump rack with 3 support points. Both sides shall not be suspended in the air for more than 1m.
2022-11-28
Taboos for the use of high-lift deep well pumps
To introduce the taboo of using high lift deep well pump The use of grounding protection for high-lift deep-well pumps is a mandatory standard in China. Only the use of grounding protection, in order to protect the use of personal safety. If there is no grounding protection, once the casing is electrified, the water at the drain of the high-lift deep well pump and the water surface of the water will be electrified, which will seriously endanger the safety of people and animals and consume a large amount of electromagnetic energy.
2022-11-18
Maintenance and installation of high-lift deep well pump and matters needing attention when setting the pump It is not necessary to wrap it with waterproof tape or electrical tape only. As the ambient humidity in the well is extremely high, it is necessary to ensure that water vapor cannot enter the internal structure of the cable, otherwise the motor will be burned.
2022-11-08
The connection method of high lift deep well pump
The following explains the connection method of high lift deep well pump The multiple strands together, oblique part of a multiple strands to one end, the other end in the same way to form. If possible, wrap the connector firmly with pliers. With tin hanging connector, the effect is obvious.
2022-10-31
What are the characteristics and advantages of small submersible pump?
The main advantages of small submersible pump are as follows: 1, the use of brushless motor, long life, small interference. 2, overheating and overload protection: as expected may cause abnormal temperature rise of the pump motor. When micro, the pump will automatically protect the system shutdown to prevent the motor from burning; if foreign matter falls into the motor, it may be stuck, and the pump will automatically control the protection shutdown to prevent the motor from burning.
-- Professional water pump and motor manufacturer
Contact Us
Address: 558 Jingguang South Street, Luohe Economic Development Zone, Henan Province
Copyright©2023 Luohe Huali Pump Industry Co., Ltd
Powered by:300.cn · Supports IPV6 access
SAF Coolest v1.3.1.1 设置面板 HDNSX-ZPGX-IVSXE-ZZQ
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page