Application and maintenance of oil immersion pump

Classification:

Industry Focus

When applying and maintaining oil immersion pumps, the following are some more detailed information:

Application:
1. Petroleum industry: oil immersion pumps are usually used for crude oil pumping, water injection and wastewater treatment in the process of oil field exploitation. They are also widely used in various process units in petroleum refineries, such as crude oil distillation, cracking, reforming and catalytic cracking.
2. Chemical industry: oil immersion pump is widely used in chemical process. They can be used to transport acids, bases, solvents and other chemical media. For example, they can be used in pickling equipment, transportation of corrosive liquids, stirring of reaction tanks, and the like.
3. Power industry: oil immersion pumps are often used in circulating water systems, boiler feed water systems and fuel supply systems in power plants. They can be used to transport media such as cooling water, boiler feed water and fuel oil.
4. Steel industry: oil immersion pumps are widely used in the steel industry. They can be used for cooling water circulation, blast furnace hearth water injection, continuous casting equipment lubrication and gas desulfurization device of liquid transport.

Maintenance:
1. Regular inspection: regularly check the operation of the oil-immersed pump, including whether the motor is running normally, whether there is abnormal noise in the bearing, whether there is leakage in the pump body, etc. Also check whether the connection parts of the pump are tight.
2. Cleaning and maintenance: Clean the oil-immersed pump regularly, especially the impurities and deposits inside the pump body and around the impeller. This can be achieved by disassembling the pump and cleaning it with detergent.
3. Lubrication and maintenance: add or replace lubricating oil in time according to the requirements of the instruction manual. The working condition of the lubrication system should also be checked regularly to ensure that the lubrication of the pump is in good condition.
4. Seal maintenance: Check the seals of the pump, such as O-rings, sealing rings, etc., to ensure that they are intact. If there is wear or aging, it should be replaced in time to prevent leakage.
Regular maintenance: regular comprehensive overhaul and maintenance of the pump, including cleaning parts, replacement of worn or damaged parts, and necessary calibration and adjustment.

Please note that the specific maintenance and maintenance measures may vary with different oil immersion pump types and manufacturers, so it is recommended to refer to the corresponding operation manual and maintenance guide before maintenance.

How to store, transport and anti-corrosion measures for high-lift deep well pumps For well pumps containing packed wooden boxes, they should be placed on a flat concrete floor. For deep well pumps without packed wooden boxes, they should be discharged flat on the pump rack with 3 support points. Both sides shall not be suspended in the air for more than 1m.

Luohe Huali Pump Industry Held "Fire Safety Knowledge Training" Activity

Luohe Huali Pump Co., Ltd. "fire safety knowledge training"

Luohe Huali Pump Industry Held "Welcome May Day" 3rd Staff Games

Opening Ceremony On April 30, 2019, Luohe Huali Pump Industry Co., Ltd. held the third employee sports meeting "Welcome May Day. Technical manager Shi Qiuyu presided over the opening ceremony, sales manager Zhu Qiuyue delivered an opening speech, and general manager Zhu Weili announced the opening of the games. The main purpose of holding this sports meeting is to enrich the cultural life of employees, enhance the interaction and communication between departments, further create a good working atmosphere of cohesion and unity, and cultivate the sense of competition, cooperation and fairness of the majority of cadres and employees. Put your physical fitness and good mental outlook into work. There are 7 ratios in this sports meeting.