Application of oil immersion pump three taboos

Classification:

Application of oil immersion pump three taboos Here, I will introduce you to the three taboos of the oil immersion pump. I hope that the readers and friends in front of the display screen can cheer up and have a good understanding of this knowledge.

Applicationoil immersion pumpThe three taboos.

All machines and equipment have a service life. The service life is not only related to the quality and characteristics of the two machines and equipment, but also related to everyone's operation specifications. If you do not apply the machinery and equipment according to the basic regulations, the service life of the machinery and equipment is bound to be reduced. Here, I will introduce you to the three taboos of the oil immersion pump. I hope that the readers and friends in front of the display screen can cheer up and have a good understanding of this knowledge.

Cannot reverse rotation

　　oil immersion pumpDivided into single-stage pump and multistage centrifugal pump, according to common sense, pump head is relatively low single-stage pump, pump head is relatively high is multistage centrifugal pump. In the process of applying single-stage pumps, it is still recommended that everyone distinguish directions. Although the oil immersion pump can produce water regardless of the front and back, it is still recommended that it does not need to be turned over. Once flipped, it is likely to damage the motor windings. And to say a word of truth, the single-stage pump of the oil-immersed pump is in a state of overturning, and the water flow rate is smaller than that of forward rotation. In addition, as a friendly reminder, I believe everyone can carefully check before entering the single-stage pump of the oil-immersed pump to see if the direction of movement of the single-stage pump of the oil-immersed pump is abnormal. If it is abnormal, it should be corrected in time. Only after it is normal can it be put into the water.

No overload operation

Whether it is people or machinery and equipment, only need high-intensity work, then it will cause some damage to itself, so is the stainless steel plate oil immersion pump. As I said above, the head of oil-immersed pump unipolar pump is generally relatively small, so it is not possible to use high-lift oil-immersed pump in some areas of work.oil immersion pumpsingle stage pump. If you do not need to use oil-immersed pump single-stage pump, then everyone should consider it in use to prevent the current from exceeding the normal range and damaging the machinery and equipment.

high frequency operation

Do you know that when the single-stage pump of the oil immersion pump is turned off, the oil immersion pump will also produce a flow-back condition. At this time, if you press and hold the start button, let the oil pump work, it will be possible to cause damage to the motor, prompting the motor load operation. After the motor load is running, the starting current will become larger and larger. To a certain extent, it is bound to cause multiple related problems in machinery and equipment. In addition, the service life of the equipment is reduced. Therefore, when using the oil immersion pump, we can not make this piece of taboo. According to common sense, it is necessary to run the oil-immersed pump single-stage pump again, at least five minutes apart.

Well, Xiao Bian will not make too many introductions. Thank you for watching. Let's see you next time.

How to store, transport and anti-corrosion measures for high-lift deep well pumps For well pumps containing packed wooden boxes, they should be placed on a flat concrete floor. For deep well pumps without packed wooden boxes, they should be discharged flat on the pump rack with 3 support points. Both sides shall not be suspended in the air for more than 1m.

Luohe Huali Pump Industry Held "Fire Safety Knowledge Training" Activity

Luohe Huali Pump Co., Ltd. "fire safety knowledge training"

Luohe Huali Pump Industry Held "Welcome May Day" 3rd Staff Games

Opening Ceremony On April 30, 2019, Luohe Huali Pump Industry Co., Ltd. held the third employee sports meeting "Welcome May Day. Technical manager Shi Qiuyu presided over the opening ceremony, sales manager Zhu Qiuyue delivered an opening speech, and general manager Zhu Weili announced the opening of the games. The main purpose of holding this sports meeting is to enrich the cultural life of employees, enhance the interaction and communication between departments, further create a good working atmosphere of cohesion and unity, and cultivate the sense of competition, cooperation and fairness of the majority of cadres and employees. Put your physical fitness and good mental outlook into work. There are 7 ratios in this sports meeting.